Panlux SL2503/B Instrucciones página 5

INSTRUCTIONS
Model: SL2503/B
Before using or installing this sensor, kindly read the instructions and follow safety rules or let the qualified
company mount it.
Thank you for choosing the item of company PANLUX s.r.o.
Technické údaje
Input voltage: 230V~50Hz
Angle dection: 360 degrees
Reach: 6m
Protection: IP66
Time setting: 10+/-5 sec až 4+/-1 min
LUX setting: 10 - 2 000LUX
Load: max. 1500W (incadescent bulb)
max. 500W (fluorescent light)
Class of protection: II
Location: inreriors, ceiling
Instalation
When selecting the mounting position, consider the following points:
The sensor is designed for optimum performance when mounted in house ceiling.
Avoid pointing at or positioning close to heat sources such as flu´s or heat extraction units, which may cause
false triggering. Avoid pointing at bright lights as unit will not function when you set LUX control to dark level.
Avoid mounting at strong electromagnetic disturbance.
Before any electrical work, ensure mains supply cables are isolated by switching off and removing the relevant
fuse. unscrew the screws and remove plastic cover (pic. 1). Unscrew plastic screw and remove the cord
anchorage plate. Connect cables to terminal box according to relative symbols. Fit the back plate on the
mounting surface with screws (pic. 2). Re-fit plastic cover and screws and adjust functions of sensor.
Adjusting the LUX control level
The Lux control module has a built-in sensing device (CdS photocell) that detects daylight and darkness. By
turning you can set the function from daylight till dark.
Adjusting the duration time:
The duration time is the lenght of time that the AL037 switches the load on after activation. The duration time
can be adjusted from 10/+-5s to 4/+-1min.
If the sensor is mechanically damaged, guarantee cannot be allowed.
CEILING SENSOR IP66
B l ack(Load)
B l ue(Load)
B l ue(M ai n P ow er)
Brow n( M ai n P ow er)
Fi gur e 1
H om e C ei l i ng
360¡ ã
6m 6m m ax 5m
m ax 5m R adi us
D et ect i on A r ea
Fi gur e 2