Publicidad
Idiomas disponibles
Idiomas disponibles
Installation using the rigging points on the
speaker
• The full-range models have suspension-mounting rigging points on
them. The speaker can be suspended using commercially-available eye
bolts. The rigging point has an M10 screw hole (for an eye bolt with a
thread length of 30 mm – 50 mm).
• When installing the speaker suspended, ask a qualified technician to
perform the work.
• Remove the screws from the rigging points on the speaker and attach
eye bolts. Do not use the speaker while the screws are removed. The
sound will be adversely affected by air leakage.
• Be sure to use at least three rigging points to suspend the speaker.
Furthermore, be sure to also implement an extra safety measure such as
using a wire.
• Use brackets, wires, and a wall or ceiling strong enough to bear the
weight of the speaker. Ask for commercially-available brackets at the
shop where you purchased the speaker.
• Be sure to confirm the safety after installing the speaker and periodically
thereafter.
':Rigging points
Connections
Active subwoofer and active satellite speaker
CAUTION
Make your initial connections with all the equipment powered off and
ensure all the main volume controls are turned down completely.
1. Connect one end of a signal cable to the Output Left/Right on your
mixer and connect the other end of the cable to the Line Input on
the corresponding (left or right) active subwoofer.
2. Connect one end of another signal cable into the Link Left/Right or
Out Left/Right of the active subwoofer, and connect the other end
to the Line Input Left/Right of the active satellite speaker.
3. Connect the power cord to a mains supply.
4. Turn on your mixer first, then the active speakers.
5. Turn up the volume control of the active speakers.
6. Use the PFL function on the mixer to get the proper input level, and
adjust the Main Mix Level control to reach the desired output level.
7. When finished, turn off your active speakers first, then the mixer.
4
En
Line
Input
Pole
Subwoofer
Line In
Left/Mono
Main Out Left
DJ Mixer, Etc.
DIGITAL SIGNAL PROCESSING
MASTER
VOL
DSP
DISPLAY
SIG
SIG
SIG
SIG/LIMITER
MIC
HI-Z
POWER
1
2
3
OFF
MAX
OFF
MAX
OFF
MAX
STEREO
MIC/LINE
HI-Z/LINE
MIX OUT
DJ Mixer, Etc.
Publicidad
