Publicidad
Assembly
Handle L
To assemble the handlebars of your scooter, follow these steps :
1. Insert the two handles into the handle of your scooter.
2.Screw the two handles.
Handle L
To disassemble the handlebars of your scooter, follow these steps:
1. Unscrew the two handles of the handle of your scooter.
2. Remove both handles.
Mounting the handlebar
Step to get started
1. Turn on the scooter, press and hold the On/Off button
briefly and release.
2. Start in speed 1 to get the hang of the speed.
3. Press the acceleration trigger, keep one foot on the
platform and one foot on the ground, put several pulses on the
ground with your foot to make the scooter move forward with
your strength and reach a speed of about 3km/h, the electric
system will start automatically, manage your speed with the
trigger.
Handle R
Handle R
Publicidad
