Taski ULTIMAXX 900 Manual De Instrucciones página 95

Single- and Double disc Deck
• Position the brush under the brush unit.
• Switch the machine on.
The indicator elements lights up briefly.
Variant: Foot pedal
• Unlock the foot pedal and lower the
tool slowly.
While lowering the brush drive will
slowly start to pulse. In this way the
tool is centered and engaged.
The brush drive display lights up
Notice:
When the brush is down, gently moving the ma-
chine back and forth can make the clutch easier to
engage.
Roller brush Deck
1
3
5
Setting the brush pressure
Manual brush lowering unit
Squeegee Assembly
B 1
A 1 A 1
1
A 2 A 2
B 2
Filling the fresh water tank
Caution:
Max. permissible water temperature 60 °C/140 °F.
- Diversey recommends using cold water, as hot water
will adjust to the ground temperature as soon as it
comes into contact with the ground. Thus there are no
advantages to using hot water.
2
• The machine must be switched off.
A
4
B 1
2
B
C
E
• Fill the fresh water tank with water.
Maximum filling level (page 88).
• Swivel the folding stand into the holder, tip the tank cover
back into its original position and press it down until it locks.
• Position the suction nozzle [A2] be-
low the suction nozzle holder [A1].
• Press the foot pedal [1] down until
the suction nozzle holder engages.
• Attach the suction hose [B1] to the
connector [B2].
• Put your hand into the opening be-
tween tank cover and tank and pull
the unlocking grip [A].
• Open the tank cover.
• Swivel the folding stand [B2] out of
the holder [B1] and place it into the
tank recess [C].
• Remove the dosage cup [D] and the
fresh water filter [E]
D
93