Getting Started And Operation; Setting The Time; Alarm Clock; Led Lighting - Hama Classic Instrucciones De Uso

4. Getting started and operation

4.1 Starting up the clock
Open the battery compartment cover (1), insert one AA battery, ensuring that the battery is
inserted correctly in terms of polarity, and then close the battery compartment cover (1). The
clock is ready for operation.
5. Operation

5.1 Setting the time

• Turn the setting wheel
current time (hours/minutes).
• To set the seconds, remove the battery to stop the seconds. Put the battery back in to start
the seconds hand again at the right second.

5.2 Alarm clock

• Move the setting wheel
to set the appropriate alarm time. The hand for the alarm time moves in an anticlockwise
direction.
• Pull the sliding switch (4) on the back outward or up to enable the alarm. An alarm will
sound at the set alarm time.
• Press the sliding switch (4) down to shut off and disable the alarm.

5.3 LED lighting

Press the Light button (5) to activate the LED lighting.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning
agents. Make sure that water does not get into the product.
4
(2) on the back in the direction indicated by the arrow to set the
(3) on the back of the alarm clock in the direction of the arrow