Kichler ARKVILLE 1 39541 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
3. Mounting surface should be clean, dry, flat and
1/4 in. larger than the canopy (A) on all sides.
Any gaps between the mounting surface and
canopy (A) exceeding 3/16 in. should be
corrected as required with silicone caulking
compound. Caulk completely around where the
back of canopy (A) meets the wall surface to
prevent water from seeping into outlet box.
4. Push fixture to wall over the flanges of the
mounting bracket (B), carefully aligning holes
in flanges of mounting bracket with holes in
canopy (A). Be sure not to pinch wires
between wall and canopy of fixture. Screw
the four (4) mounting screws (CC) into the
canopy and mounting bracket flanges to
secure fixture to wall. Tighten to secure.
Hardware Used
Mounting
CC
Screws
3
4
x 4
5
A
B
A
CC