Publicidad
Idiomas disponibles
Idiomas disponibles
Operation Instructions
Once the fan has been completely assembled, you may now plug it in. Turn on the fan by
switching the control knob to any of the rotational speeds '1', '2', or '3' on the control panel
('3' is the fastest speed). '0' is 'OFF'.
To make the fan oscillate (rotate from side to side) push down the Oscillation Knob (H)
located on the top of the motor (F). To stop oscillation, pull the button out.
Cleaning Your Fan:
WARNING: Make sure the blades have come to a complete stop before proceeding with
cleaning.
NOTICE: Always unplug the product before cleaning or storing it.
1. Turn the dial to the off position 'O' and disconnect the power cord from the electrical
outlet.
2. Allow the blades to come to a complete stop and remove the grill plate.
3. With a soft damp cloth carefully wipe the blades and exterior. Making sure water does not
drip into the fan motor housing.
4. Do not immerse the unit in water and never allow water to drip into the motor housing.
NOTE: Do not use thinners, benzene or any other type of abrasive materials to clean the fan.
For stubborn spots use a small amount of mild soap to scrub the area. Wipe clean.
5. Carefully wipe clean and replace the grill plate securing it in place.
FAN STORAGE:
Your fan can be stored partially disassembled or assembled. Make sure to store it in a safe
and dry location away from the reach of children.
For disassembled storage we recommend using the original box.
For assembled storage we recommend using a dust cover to protect the fan from dust, place
it away from where parts can be damaged.
5
Publicidad
