PLAYKIN QUAD RACER Manual De Instrucciones página 37

INSTALLING THE HANDLEBARS
1. Insert the steering lever into the steering
wheel and then bind the hole, use the
machine screw to tighten. Finally, insert
the steering lever through the long square
hole of the front wheel connector after
passing through the inside of the body,
and then insert the handlebar into the
body until you hear the "crack".
2. Insert the guard into the body.
3. Use screws to secure the crash tube to the
front of the body.
MAINS CONNECTION
1. Plug the red line terminal of the power
supply into the battery (red to red), and
insert the engine line.
INSTALLING THE SEAT
1. Turn the seat knob to the open position,
install the seat and turn the knob to the
closed position.
2)
3)
37
1)
Driv e
plug drive motor plug
z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z
EN