13.1. Connecting Bluetooth devices
Enable the Bluetooth function on your external device and then connect to it.
Refer to the user manual for your device for more information. The audio sys-
tem's name is "MD 43365".
If you are prompted to enter a password on the external device, enter "0000" as
the password.
You have now set up the connection and can use the external device with the
audio system.
You can control how tracks are played, the volume and a range of special functions
on your external device and on the audio system. What functions are available is de-
pendent on your external device and the software that you use.
If you want to stop data transfer via Bluetooth, either switch off the Bluetooth
function on the external device or select a different source on the audio system.
13.2. Control via remote control (Bluetooth range)
You have the following options for controlling the tracks using the audio system's
remote control:
To adjust the volume, use the VOL and VOL+ buttons on the remote control or
the control on the device.
•
Press to start or pause playback.
•
Press or to go back to the previous track or skip to the next track.
Please note: not every function is available for every external device. Some func-
tions may be displayed in the external device's display.
14. Playback on the LINE IN connection
Connect an external device as described in section "7.6. Connecting USB devices" on
page 55. Playback is controlled via the external device.
15. System menu
Proceed as follows to navigate through this menu and change the settings:
If the device is switched on, press and hold the MENU button to access the
menu. The menu entries differ depending on the operating mode set. Please re-
fer to the table below for further information.
Use the or buttons to select a specific menu or specific entry.
Press the button to open a specific menu or to confirm a setting.
Press MENU to return to the previous menu.
Press and hold MENU to exit the menu directly.
64