Publicidad
Optional: Ladder instructions
Maje sure the steel tube's hook face inside and the plastic plate's mesh face upwards. The plate is
not flat, you need to keep the lower side of plate towards outside and keep the higher side of plate
towards inside.
1) Insert one steel tube into the hole of the plate. Then move the plate to the top in accordance with the
hole on the steel tube.
2) Insert another steel tube into the other end of the plate's hole. Keep the hole of plate in align with
the steel tube's hole. Fasten them with attached screws and bolts.
3) Attach the second one plastic plate with the same method. Cover the bottom end of ladder tube with
black boots.
4) Ladder is ready to use!
Manual – Trampoline – Senz Sports – J5000 Series – SZTR
10
Publicidad
