Publicidad
Idiomas disponibles
Idiomas disponibles
20. "To be in compliance EN 61000-3-11, the product shall be connected only to a supply of
the system impedance: Zsys = 0.40089 ohms or less. Before connect the product to
public power network, please consult your local power supply authority to ensure the
power network meet above requirement."
.INSTALLATION...
1. Take out all the packing. If there is a safe film over the oven, tear it off before use. Check
carefully for damage. If any, immediately notify dealer or send to the manufacturer's
service center.
2. Microwave ovens must be placed under dry and non-corrosiveness environments, kept
away from heat and humidity, such as gas burner or water tank.
3. To ensure sufficient ventilation, the distance of the back of microwave to the wall should
be at least 10 cm, the side to the wall should be at least 5 cm, the free distance above the
top surface at least 20 cm. the distance of the microwave to the ground should be at least
85 cm.
4. The position of the oven shall be such that it is far from the TV, Radio or antenna as
picture disturbance, or noise may occur. The distance should be more than 5m.
5. The appliance must be positioned so that the plug is accessible, and must ensure a good
grounding in case leakage, ground loop can be formed to avoid electric shock.
6. The microwave oven must be operated with the door closed.
7. The microwave oven must not be placed in a cabinet. The microwave oven is intended to
be used freestanding.
8. As there is manufacturing residue or oil remained on the oven cavity or heat element, it
usually would smell the odor, even a slight smoke, It is normal case and would not occur
after several times use, keep the door or window open to ensure good ventilation. So it is
strongly recommended to place a cup of water in the cavity, setting at high power and
operate for several times.
............
4
Publicidad
