Publicidad
Emptying the waste water container.
1. Pull the trigger and open the drain cup to equalize the pressure between the chambers.
2. Open the seat cover (1).
3. Pour a little water into the waste container (12). (Be careful not to overflow the contents of the waste water tank. There should be
about 10 cm of free space below the drain valve.)
4. Press the release lever (9) and close the waste container.
5. Pull the clamps (7) on both sides of the waste container upwards and detach the clamps from the seat.
6. Pull the seat (6) up to detach it from the waste container (12).
7. Grasp the waste container (12) by the handle.
8. Move the container to the designated area for waste disposal.
9. Turn the waste container to the vertical position so that the waste does not spill out as soon as the tap is turned on.
9. Open the tap (11) from the waste container.
10. Empty the waste container.
11. Wash the container inside and out thoroughly.
12. Refill the neutralizing fluid in the center of the container using the open tap.
13. Close the tank tap (11).
14. Put the seat (6) on the tank (12), making sure that the tap from the waste tank is under the flush water tap.
15. Close the buckles (7) from the waste bin to the seat. First, hook the buckles (7) to the sides of the seat (6) and press the buckles to
lock them.
16. The device is now clean and ready for further use.
Technical data:
Clean water container capacity: 12 L
Capacity of the waste container: 20 L
4
Publicidad
