D-Link DAP-1160 Guía De Instalación Rápida página 5

PRODUCT
SETUP
EASY SETUP
DAP-1160
DAP-1160
Login
User Name xxxx
Password
DAP-1160
CONNECT THE POWER ADAPTER
Check the AC voltage of your AC power outlet against the AC power
input of the power adapter. Connect the power adapter supplied with
the DAP-1160 to the power socket on the back of this device first,
then plug it to your AC power outlet. Check to see that the Power
LED on the front panel of the DAP-1160 is turned ON.
WARNING! The DAP-1160's power output is 12 volts DC, 0.5
Ampere. Use only the power adapter supplied with this DAP-1160 or
one with the same power specifications. Using a power adapter with
a different voltage or plugging your DAP-1160 to a wrong AC voltage
outlet will damage this device and will void the warranty for this
product.
CONNECT THE ETHERNET CABLE
Connect one end of the Ethernet cable to the LAN port on the
back panel of the DAP-1160, and the other end of this cable to
your computer's Ethernet port. If your computer is connected to
an Ethernet network via an Ethernet switch, connect this end of
the cable to the switch's port.
CONFIGURE THE DAP-1160
Open a web browser and go to http://dlinkap
(or http://192.168.0.50). Enter admin as the User name, and
leave the Password blank. Now you can use the Setup Wizard
to configure your DAP-1160.
3