WARNING:
For indoor use only. This is not a pool toy. Only use for infant bathing.
Fall hazard - When using PUFF
enough to fit the entire product. Do not straddle PUFF
For US, Complies with ASTM F2670-18
WARNING
Drowning Hazard: Babies have drowned while
using infant bath tubs.
To prevent drowning:
• Stay in arm's reach of your baby.
• Never rely on a toddler or preschooler to help your
baby or alert you to trouble. Babies have drowned
even with other children in or near bath tub.
• Babies can drown in as little as 1 inch of water.
Use as little water as possible to bathe your baby.
• Use in empty adult tub or sink.
• Keep drain open in adult tub or sink.
• Always remain in contact with your child.
• Never leave your baby unattended in the bath,
even for a few moments. If you need to leave the
room, take the baby with you.
Fall Hazard: Babies have suffered head injuries
falling from infant bath tubs.
To prevent falls:
• Place tub only in adult tub or sink.
• Never lift or carry baby in tub.
• Always use this product on a level surface.
in a sink, ensure that the sink is large
®
over a sink.
®
IMPORTANT:
• Before use, partially inflate by mouth or low pressure pump, place
the fabric cover over the inflatable, and then fully inflate. Do not over
inflate. Ensure that the valve in the inflatable aligns with the hole in the
fabric cover.
• Always ensure that the fabric cover is secured to the bather before use.
Never use the inflatable portion on its own without the fabric cover. Use
the fabric cover only on the provided inflatable bather. Do not use the
fabric cover on any other device.
• After inflating, check to make sure that your infant is comfortable in the
bather before use.
• Test the temperature of the water in, or being put into, the infant bath
tub prior to placing the infant into the bath tub. The typical water
temperature for bathing a baby should be between 90 and 100°F
(32.2 and 37.8°C). Discontinue use of the product if it becomes
damaged, broken, or disassembled.
• Never use this product on any elevated surface (except free-standing
within a sink).
• To avoid scalding by hot water, position the product in such a way to
prevent the child from reaching the source of water.
• Always check the stability of the product before use.
• To deflate, depress the flap within the valve while compressing the tub.
Wring excess water out of the cover.
• Do not use PUFF
once your child can sit up unaided.
®
CLEANING & CARE
• Pour out water from the inflatable portion after each use.
• Clean inflatable portion of tub with sponge using mild soap and
water. Do not use detergent or bleach.
• Cover can be machine washed in cold water. Hang to dry or tumble
dry on low. Do not iron. Do not bleach. Do not dry clean.
• Before each use, inspect the bather to be sure that all parts are
correctly positioned, ensure that the inflatable portion is fully inflated,
and check along all seams for any air leakage. Always check the
attachment and the stability of the fabric cover on the inflatable.
• Discontinue use of the product if it becomes damaged, broken, or
disassembled.