Samsung SCC-B5342 Instrucciones De Funcionamiento página 10

Connecting cables and changing the settings
❚
Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
To adjust the lens focus, zoom, and function settings
1. Remove the Cover dome and Inner cover. For more details about the removing procedures,
see "Installation procedure," in the Installing camera section on the next page.
. Adjust the focus, zoom, and function settings of your camera using the Focus lever, Zoom
lever, and Switch board while you are viewing the image on the screen.
. If you want to fix the adjusted focus and zoom, screw up the levers.
10
Monitor
BNC Cable
To connect cables
1. Connect the BNC cable
to the Video connector
attached on your camera.
. Connect the BNC cable
to the Video Input on a
monitor.
. Connect the power adapter
to the Power connector
attached on your camera.
When the monitor is turned
on, the camera image
appears.