F.Bertazzoni K60 Serie Manual De Instrucciones página 11

WARNINGS
UK
This instruction booklet must be kept together with the appliance for future reference. If the ap-
pliance is sold or consigned to other parties, check that the booklet is supplied with it, to ensure
that the new user has the correct information on the operation of the range hood and is aware of
the warnings. These warnings have been provided for the your safety and the safety of others. As
a result, please read them carefully before installing and operating the appliance.
This appliance is not intended for use by persons (including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance must be installed by qualified personnel, in accordance with the standards in force.
If the supply cord is damaged, it must be re-placed by the manufacturer, its service agent or simi-
larly qualified persons in order to avoid a hazard. Any modifications that may be required to the
electrical system for the installation of the range hood must only be made by qualified electricians.
It is dangerous to modify or attempt to modify the characteristics of this system. In the event of
malfunctions or if repairs are required to the appliance, do not attempt to solve the problems
directly.
Repairs performed by unqualified persons may cause damage. For all repair and other work on
the appliance, contact an authorised service/spare parts centre.
Always check that all the electrical parts (lights, exhaust device), are off when the appliance is not
being used. Read the entire instruction booklet before performing any operations on the range
hood.
The range hood must only be used for the exhaust of cooking fumes in home kitchens. The manu-
facturer disclaims all liability for any other use of the appliance.
The maximum weight of any object placed above the hood, or hung to it (if possible) must not
exceed 1,5 kilos. After installing the stainless steel hood, clean it in order to remove any residue of
the protective glue, and stains of grease or oil. The manufacturer recommends its cleaning cloth
available for purchase. The manufacturer accepts no liability in case of damage caused by the use
of different detergent types.
CAUTION:
This product must be disposed of at end of life according to the rules in force.
The electrical system features an earth connection in compliance with international safety stan-
dards; furthermore, it is compliant with the European standard for electromagnetic compatibility.
Do not connect the appliance to flues (from boilers, fireplaces, etc.). Make sure the mains voltage
corresponds to the values on the rating plate located inside the range hood.
Never cook on "open" flames under the range hood.
Check deep-fryers during use: superheated oil may be flammable.
- Ensure there is adequate ventilation of the room when the rangehood is used at the same time
as appliances burning gas or other fuels.
- Do not flambe under the rangehood
- The exhaust air must not be discharged into a flue which is used for exhausting fumes from
appliances burning gas or other fuels.
- Ensure that all regulations concerning the discharge of exhaust air have been fulfilled before
you use the appliance.
Before performing any cleaning or maintenance operations, disconnect the ap-
pliance by unplugging it or using the main switch. The manufacturer disclaims
all liability for any damage that may be directly or indirectly caused to people,
things and animals due to the failure to follow all the instructions provided in
this booklet and above all the warnings relating to the installation, operation
and maintenance of the appliance.
- there is a fire risk if cleaning is not carried out in accordance with the instructions.
CAUTION: Accessible parts may become hot when used with cooking appliances.
- Max. length screw for fixing the chimney is 10 mm (provided by the manufacturer).
WARNING: Failure to install the screws or fixing device in accordance with these instructions
may result in electrical hazards.