Therabody Recovery Pulse Arm Manual De Instrucciones página 9

Charging
•
The RecoveryPulse Arm Vibration Device is USB-C enabled.
•
The RecoveryPulse Arm Vibration Device includes a Therabody USB-C to USB-A cable.
•
You can plug the device into any standard USB adapter.
•
The USB port is located in the right side of the battery pack and is accessible by removing the battery
from the sleeve pocket.
•
The battery level is indicated in the LED indicator of the battery:
•
Red: low charge, blue: mid charge, green: fully charged.
•
When charging, the LED will flash to indicate it is properly connected and will turn solid
green when complete.
•
You can always check the battery level by inserting the battery in the sleeve and tapping the
power button once.
Note: Make sure the charger is from a certified manufacturer and it has not suffered any structural damage.
The device will not work while charging.
EN
9