VITO GARDEN VITR2500 Manual De Instrucciones página 29

Question/Problem - Cause
Cause
The garden shredder does not start:
• The power cord is unplugged or damaged;
• ON/OFF switch electrical contacts are not in good
condition or it does not work;
• The overload protection switch has tripped;
The motor makes
intermittently or runs slowly:
• ON/OFF switch electrical contacts are damaged;
• Mechanical parts are blocked;
• The garden shredder is running over excessive
pressure, overloaded motor;
The overload protection switch has tripped:
• There is an accumulation of shredded material
around the cutting disc and blades;
• The branches to be shredded are larger than the
motor's capacity;
• If you insert an excessive quantity of branches;
The garden shredder
performance:
• The blades are blunt or damaged;
an abnormal sound,
has poor and powerless
Solution
• Plug in or repair the power cord;
• Repair or replace the switch;
• Refer to "Start and stop";
starts
• Repair or replace the switch;
• Inspect the mechanical parts;
• Reduce the pressure applied;
• Refer to "Start and stop";
• Do not shred branches with larger diameter than the
appliance's capacity;
• Reduce the number of branches;
• Refer to "Blades" within the maintenance and cleaning
instructions;