Publicidad
Idiomas disponibles
Idiomas disponibles
e)
Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or long hair can be caught by
moving parts.
f)
Remove all adjusting tools or keys before turning the device on. A tool or key
left in the rotating part of the device may cause injury.
g)
The device is not a toy. Children should be supervised to ensure that they do
not play with the device.
2.4.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the given
application. A correctly selected device ensures better and safer performance
of work.
b)
Do not use the device if the ON/OFF switch does not function properly (does
not switch on and off). Devices that cannot be controlled by the switch are
dangerous, must not be operated and must be repaired.
c)
Pull the plug out of the socket before making adjustments, changing
accessories or storing the device. This preventive measure reduces the risk of
accidental activation.
d)
Keep unused devices out of the reach of children and anyone not familiar with
the device or these instructions. Devices are dangerous in the hands of
inexperienced users.
e)
Keep the device in good working order. Before each use, check for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
f)
Keep the device out of the reach of children.
g)
Repair and maintenance of the device should be carried out by qualified
persons using only original spare parts. This will ensure a safe use of the device.
h)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen any screws.
i)
When transporting and moving the device from the place of storage to the
place of use, follow the health and safety regulations for manual transport that
apply in the country in which the device is used.
j)
Avoid situations where the device stops under heavy load during operation.
This can cause overheating of the drive elements and subsequent damage to
the device.
k)
Do not touch moving parts or accessories unless the device has been
disconnected from the power supply.
l)
Do not leave the switched on device unattended.
m) Clean the device regularly to prevent the permanent accumulation of dirt.
Publicidad
