Maintaining And Cleaning The Product - Dometi PLB40 Instrucciones De Uso

PLB40
Problem
The display shows the warn-
ing symbol. The discharge
arrow and either the USB or
2-pin or DC symbol flashes.
An error sound is beeping for
60 seconds.
The battery symbol is flash-
ing. An error sound beeps
every 3 seconds for 10 times.
After the beeps the device
switches off automatically.
The letters and symbols on
the display are fading.
8

Maintaining and cleaning the product

A
NOTICE! MATERIAL DAMAGE.
•
Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the product.
•
Do not use alcohol based cleaning materials for cleaning the gloss
top cover.
•
Fully charge the lithium iron phosphate battery at least every six
months. Overloading the battery or storing it for too long without
charging it may cause permanent damage to the battery.
➤ Occasionally clean the product with a damp cloth.
EN
Maintaining and cleaning the product
Cause
Over current protection was
triggered.
Short circuit protection was
triggered.
The battery capacity is 0 %.
The display is overheated.
The display is defective.
Remedy
Turn the device off. Release
some of the load before
switching the device on
again.
Turn the device off. Clear the
short circuit before switching
the device on again.
Charge the device.
Place the battery pack in a
cool environment.
Contact a service center.
15