Homewerks 7150-02 Manual De Instrucciones

®
BATHROOM FAN 2-FUNCTION LED WALL CONTROL SWITCH
MODEL 7150-02
READ AND SAVE THESE INSTRUCTIONS
PRODUCT SPECIFICATIONS
Voltage: AC120V/60Hz
Electrical Appliance Type: Electric lamp and motor type fan for home use
Ground/Green Wire
AC120V
Neutral/White Wire
Power/Black Wire
CAUTION
• For indoor use only.
• Installation Location: Wall.
• This product can be used in the bathroom with a GFCI protection circuit.
• The operating control must be grounded.
• Storage Temperature: -4ºF - 140ºF (-20º C - 60º C).
PREPARATION
Tools required for assembly: Phillips screwdriver and wire stripper.
INSTALLATION STEPS
1. Connect the switch according to the wiring diagram.
2. Press the ON/OFF icon on the switch. Once the indicator light of the ON/OFF icon turns on, the switch has received the electrical connection.
3. Press the desired function icon. Once the indicator light of the corresponding function turns on, the function will start. For example, when you press the fan icon,
the fan icon indicator light will turn on and the fan will begin working.
4. Press a function icon again. Once the indicator light of the corresponding function turns off, the function stops. For example, when you press the fan icon a second time,
the fan icon indicator light will turn off and the fan will stop working.
Questions, problems, missing parts? Before returning to the store, call our customer service department at 1-877-319-3757, 7:30 a.m. - 4:30 p.m., CST, Monday - Friday.
Homewerks.com
Wiring Diagram
Fan Light
Fan/Red Wire Light/Brown Wire
Black Wire
White Wire
Green Wire
Red Wire
Brown Wire ......................................................
Max Power of connecting electrical appliance: AC120V/1A
Prevailing Ambient Temperature: 32ºF - 104ºF (0º C - 40º C)
Packaging and Hardware Contents
Switch, plastic wire connectors, screws, and instruction manual.
IMPORTANT! READ BEFORE INSTALLATION:
1. All electrical wiring must comply with the National Electrical Code ANSI / NFPA
70-1999 and local electrical codes. Electrical installation should be performed
by a qualified licensed electrician.
2. To reduce the risk of fire or injury, do not use this product with any variable wall
controller.
3. The wrong wiring connection will damage the operating control.
E505940
Made in China
@2020 Homewerks Worldwide, LLC