Publicidad
Idiomas disponibles
Idiomas disponibles
| Use | Maintenance and Cleaning | Service |
GB
Use
Cutting:
Raise the levered cutting knife
Raise the levered cutting knife
Carefully insert the material to be cut at
Carefully insert the material to be cut at
right angles.
Press down the clamping strip
Press down the clamping strip
to secure the material.
Press down the levered cutting knife
Press down the levered cutting knife
cut the material.
Note: You should always press down the
Note: You should always press down the
levered cutting knife
metal cutting surface.
Maintenance and Cleaning
Maintenance:
•
Setting / adjusting the levered cutting knife:
Do not drop the levered cutting knife.
•
If the levered cutting knife is no longer
stable, tighten the adjusting screw
the help of an Allen key (5 mm) until the
levered cutting knife can still be raised or
lowered without difficulties.
Cleaning:
•
Clean the sword cutter from time to time
with a soft dry cloth. You should never use
liquid cleaning agents, petrol, solvents or
detergents.
8
Q
at.
E
in order
Q
to
Q
carefully to the
T
with
Service
2 YEARS LIMITED GUARANTEE IN EUROPE
For devices marketed by 3T Supplies AG, Peach
Division there is a two-year guarantee in Europe
from the date of purchase. All damage or faults
resulting from incorrect operation, whether
supervised or unsupervised, or non-compliance
with the manufacturer's instructions for opera-
tion and service, are excluded from this guar-
antee. Suitable packaging must be used if the
machine is returned to 3T Supplies AG, Peach
Division. If inappropriate packaging has been
used 3T Supplies AG, Peach Division shall not
be liable for loss or damage to the machine
during transport.
For repairs within the guarantee period please
contact:
3T Supplies AG, Peach Division
Chaltenbodenstr. 6
CH-8834 Schindellegi
: 0 08 00 - 55 77 88 12
support@peach.info
www.3ppp3.com
Publicidad
