12
BRAINS
BRAINS
(EN) Controls
1. DISPLAY – Produces a waveform of the audio
content for quick visual feedback.
2. USB – Connect a standard USB cable for
firmware updates.
3. BANK button – Toggles between red,
green and yellow banks.
4. TIMBRE knob – Function varies depending
on the model selected, but generally sweeps
from darker to brighter content.
5. HARMONICS knob – Function varies
depending on the model selected, but
generally adjusts frequency spread or
tonal balance.
6. TIMBRE CV LEVEL – Attenuates the voltage
received at the Timbre CV input. If the CV
input is not patched, and a signal is received
at the Trig input, this knob will instead control
the amount of modulation from the internal
envelope generator.
7. TIMBRE CV – Control the Timbre parameter
via external control voltage.
8. OUT 1 – Sends the main processed signal via
3.5 mm TS cable.
9. MODEL jack – Allows model selection to be
made remotely via external control voltage.
10. MODEL button – Scrolls through the
available models in the currently-active bank.
The current model is displayed on the OLED
display
.
(1)
11. MODEL/BANK LEDs – indicate the current
model and bank, in either red, green or yellow.
12. MORPH knob – Function varies depending
on the model selected, but generally controls
the character.
13. FREQ knob – Covers a range of 8 octaves,
but can be narrowed down to 14 semitones.
13
Quick Start Guide