Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Reloading the nylon string
Only use nylon string with the recommended diameter of 1.8 mm and length of 8 meters.
The spool can be reloaded, as follows
Fit the string into the spool opening (1) according to figure [Fig. 09, page 05].
Coil the string in the direction indicated by the arrow on the reel (2), [Fig. 10, page 05] as uniformly as
possible, respecting the recommended maximum length of 8 meters.
Using a nylon string with a diameter larger than specified will void the warranty.
Replacement parts
It is recommended that replacement parts and nylon string spools are of the same Tramontina brand
and model. The string used in the spools is specifically for this purpose.
Nylon string adjustment
Manual
While holding down the spool button (1) [Fig. 11] pull the nylon string out to the limiter blade on
the guard. Then release the spool button and the nylon string so that the spool may automatically be
adjusted to its housing.
Automatic
With the engine in operation, lightly press the spool button down against the ground [Fig. 12,]. The
excess string will be cut by the limiter blade (2), [Fig. 11] when the trimmer is operated.
1
PRESS
2
Fig. 11
Fig. 12
CARE AFTER USE
• After use, always disconnect the trimmer from the outlet.
• When not in use, the trimmer must be stored out of the reach of children.
• Never replace the nylon string with one not specified by Tramontina.
• Never use metal to replace the nylon string.
• Always keep the ventilation openings of the engine clean.
• After use, clean the trimmer using a wet cloth or brush.
• Never pour water on the trimmer.
14
Publicidad
