I TUTTOFARE NGW000024NOC Manual De Instrucciones página 11

ELECTRIC KETTLE
KETTLE DESCRIPTION
3
4
1
1. Base with wire storage
2. Power O / I
"O" kettle off
"I" kettle on
3. Lid opening
4. Lid
5. Light
USER MANUAL OF THE ELECTRIC KETTLE
• Before first use, unpack the appliance.
• Set the required length of the power cord, put the rest of the cord into the
base of the kettle (1).
• The base should be placed on a clean, dry, flat surface.
• Fill the kettle with the required amount of water. If the kettle has been
overfilled, there is a risk that boiling water will overflow while if too little of
water kettle may not work properly.
• Water can be poured through the spout or through the open lid, which
should be properly closed after pouring the water.
• The water must reach a minimum and must not exceed the maximum
level indicated inside the kettle.
• Do not pour the water when the kettle is on the base.
• Put the kettle on the base.
• Plug the power plug into a power socket.
• Turn on the kettle by pressing the switch (2).
• When the water is boiling the kettle switched off automatically.
2
5
11