Publicidad
Idiomas disponibles
Idiomas disponibles
14. Maintenance
Caution
•
Please release pressure before disassembly.
•
Before you clean the air conditioner, ensure it is powered off.
•
Check that the wiring is undamaged and connected.
•
Use a dry cloth to wipe the indoor unit and remote controller.
•
A wet cloth may be used to clean the indoor unit if it is very
dirty.
•
Never use a damp cloth on the remote controller.
•
Do not use a chemically treated duster on the unit or leave this
type of material on the unit to avoid damaging the finish.
•
Do not use benzene, thinner, polishing powder, or similar
solvents for cleaning. These may cause the plastic surface to
crack or warp.
Method for cleaning the air filter
a. The air filter can prevent the dust or other particles from
entering the unit. If the filter is blocked, the unit will not work
well. Clean the filter every two weeks when you use it regularly.
b. If the air conditioner is positioned in a dusty place, clean the
filter often.
c. Replace the filter if it is too dusty to clean (the replaceable air
filter is an optional fitting).
1. Open the air return plenum, remove the two screws of the
filter frame, and pull the filter out.
2. Dismantle the air filter.
3. Clean the air filter
Dusts will accumulate on the filter along with the unit operation,
and need to be removed from the filter, or the unit would not
function effectively.
Clean the filter every two weeks when you use the unit regularly.
Clean the air filter with a vacuum cleaner or water.
a. The air intake side should face up when using a vacuum
b. The air intake side should face down when using clean water.
For excessive dusts, use a soft brush and natural detergent to
clean it and dry in a cool place.
Figure 14.1
17
cleaner. (Refer to Figure 14.2)
(Refer to Figure 14.3)
Figure 14.2
Figure 14.3
V.2
Publicidad
