Orbegozo RM 1000 Manual De Instrucciones página 10

RM 1000 / RM 1500 /
RM 2000
MOUNTING LEGS
Place the wheels on the brackets and click them together.
Place the brackets with wheels on the ends of the bottom of the unit and screw.
WALL MOUNT
Prior to the installation on a wall, you should be aware that the device, once installed, must
comply with the following minimum distances:
• On the floor: 25 cm.
• A side wall: 15 cm.
• In any case above the radiator should be no impediment (tables, shelves, etc.) less
than 50 cm.
Attach the unit to the wall using these steps:
- Place the bracket against the wall and mark the holes.
- Drill the wall at the marked points and enter the plastic anchors.
RM 1000: a = 245mm
- Then attach the brackets to the wall using the four screws provided.
- Once installed the brackets, put the radiator. Place the radiator vertically, putting the
brackets into the apertures in the back of the device (pic 1). Then, move the radiator to the
All manuals and user guides at all-guides.com
RM 1500: a = 345 mm RM 2000 : a = 445 mm
10