Descargar Imprimir esta página

Camplux FT30CB Instrucciones De Instalación página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

9. Turn the cylinder valve on the tank clockwise to close the
propane tank. Attach the preassembled regulator from the
table top (B) to the cylinder valve by turning the regulator
coupling nut clockwise. Make sure it is fastened securely
and tighten connections by hand only.
10. Remove the rubber cap on the electronic igniter (Q) by
unscrewing and slide battery (L) into the battery slot.
Make sure the positive side of the battery faces outwards.
Screw the electronic igniter cap (Q) over the battery tightly.
11. Pour the box of lava rocks (K) into the frebowl (O).
CAUTION
To ensure proper function, the guard (N) on this burner (P)
should be free of lava rocks at all times.
Operation
Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor area. Connect
the propane gas tank to the regulator and turn the valve on the unit to the "off" position. Brush a soap and water
mixture on all connections. Turn the gas supply on; if bubbles occur on any connection there may be a leak. If
you smell gas or a leak is discovered turn the gas valve off, disconnect propane gas tank and do not use
the appliance until the leak is repaired.
3330-A Marathon Ct Charleston, SC 29418
Visit Us: Camplux.com
www.camplux.com
Black Coupling
Nut Turn Clockwise
To Connect
Regulator
1(844) 538-7475
Relief Valve
Cylinder Valve
O
N
support@camplux.com
8
Pressure
Bleed-off
Valve
Turn Clockwise
To Reseal
Q
L
K

Publicidad

loading

Productos relacionados para Camplux FT30CB