urmet domus 1092 Manual De Usuario página 8

•
Unscrew the two housing closing screws and lift the housing to open.
•
Remove the camera support by loosening the 4 fixing screws.
•
Fix the camera to the bracket using one of the two provided screws.
Important note:
The housing is provided with two different length screws and two different height brackets; according to the
camera, use the most suitable screw and bracket.
•
Connect the camera power supply cable (if the camera can be powered by the mains) to the OUT
terminal block. On the printed circuit silk-screen there are the marks PHASE (L), NEUTRAL (N) and
EARTH (symbol).
8
DS1092-061A