Worcraft HC14-070 Manual De Instrucciones página 7

● Before starting the cleaner, make sure that it is receiving water correctly. Operating the cleaner
without water could damage the seals.
● Do not disconnect the plug by pulling on the electrical cable.
● If you are too far from the object you wish to clean, do not move the cleaner nearer by pulling on the
high pressure hose; use the handle provided.
● In versions not equipped with TSS device, do not operate the cleaner for more than 1-2 minutes with
the gun closed as this could damage the seals.
● Protect the cleaner from freezing during the winter.
● Do not obstruct the ventilation grilles during operation.
● The cross-section of any extension cables used must be proportional to their length, i.e. the longer
the extension cable, the greater the cross-section; cables with a protection level of "IPX5" must be
used.
● Position the cleaner AS NEAR POSSIBLE to the water supply.
● The packaging is easily recyclable, and must be disposed of in compliance with the regulations in
force in the country of installation.
● Use the cleaner only with accessories and replacement parts authorized by the manufacturer. The
use of original accessories and replacement parts will ensure safe, trouble-free operation.
● The cleaner must be used standing on a secure, stable surface.
● Avoid unintentional fi ring of the trigger. Do not carry the lance/ trigger assembly with your hand over
the trigger. Always use the trigger lock mechanism.
● Ensure that the safety lock on the trigger is used, when you have stopped using the pressure washer
to prevent accidental operation.
SAFETY "MUST NOTS"
- EXPLOSION OR POISONING.
DO NOT use the cleaner with inflammable or toxic liquids, or any products which are not
compatible with the correct operation of the cleaner.
- INJURY HAZARD.
DO NOT direct the water jet towards people or animals.
- ELECTRIC SHOCK HAZARD.
DO NOT direct the water jet towards the unit itself, electrical parts or towards other electrical
equipment.
- SHORT CIRCUIT HAZARD.
DO NOT use the cleaner outdoors in case of rain.
- INJURY HAZARD.
DO NOT allow children or incompetent persons to use the cleaner.
- ELECTRIC SHOCK HAZARD.
DO NOT touch the plug and/or socket with wet hands.
- ELECTRIC SHOCK AND SHORT CIRCUIT HAZARD.
DO NOT use the cleaner if the electrical cable is damaged.
- EXPLOSION HAZARD.
DO NOT use the cleaner if the high pressure hose is damaged.
- ACCIDENT HAZARD.
DO NOT jam the trigger in the operating position.
- ACCIDENT HAZARD.
Check that the data plates are affi xed to the cleaner, if not, inform your dealer. Cleaners without
plates must NOT be used as they are unidentifi able and potentially dangerous.
- EXPLOSION HAZARD.
DO NOT tamper with or alter the calibration of the safety valve.
- HAZARDOUS ALTERATION OF OPERATING PERFORMANCE.
DO NOT alter the original diameter of the spray head nozzle.
- ACCIDENT HAZARD.
DO NOT leave the cleaner unattended.
- SHORT CIRCUIT HAZARD.
DO NOT move the cleaner by pulling on the electrical cable.
SAFETY "MUSTS"