Descargar Imprimir esta página

Worx WX463 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
8. TROUBLESHOOTING
Symptom
Tool will not start when
power on
Poor cut quality
Work efficiency is low.
Blade is not clamped tightly by
the Blade Holder.
9. DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
10
On behalf of Positec declare that the product,
Description Worx Jigsaw
Type WX463 WX463.X (460-479-designation of
machinery, representative of Jig Saw)
Function Sawing various materials
Complies with the following directives,
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
Standards conform to:
EN 62841-1
EN 62841-2-11
EN 55014-1
EN 55014-2
EN IEC 61000-3-2
EN 61000-3-3
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Jigsaw
Possible Causes
• Power cord is not plugged.
• Blade is worn out.
• Blade is assembled incorrectly
• Cutting process is too fast.
• Blade is worn out
• Incorrect speed setting
• Incorrect Pendulum function
setting
• Blade is not inserted into place
fully.
Possible Solution
• Check to make sure power cord is
connected well into a working outlet.
• Make sure the blade is sharp and not
broken.
• Make sure the blade is installed properly.
Push the machine slowly.
• Change to a new blade.
• Adjust the variable speed control
according to the material
• Adjust the pendulum function control
according to the material
Dismantle the blade and reinstall it
correctly.
2022/7/25
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
EN

Publicidad

loading

Este manual también es adecuado para:

Wx463.x