Front Panel - Work Pro W PA 6306 Instrucciones De Usuario

FRONT PANEL

1 2 3
1. CHIME SWITCH
Press down this switch, the chime is activated.
2. PRIORITY
Press down this switch, mic will mute the other music source.
3. INPUT JACK
Mic with unbalanced input.
4. INPUT VOLUME CONTROL
When it is 0dB. The volume is lowest; It is 10dB, the volume is highest.
5. ZONE SELECT
These 6 switches can distribute the input signal to 6 groups output independently.
6. HEADPHONE VOLUME CONTROL
When it is 0dB. The volume is lowest; It is 10dB, the volume is highest.
7. ZONE OUTPUT VOLUME CONTROL
When it is 0dB. The volume is lowest; It is 10dB, the volume is highest.
8. CLIP LED
When the clip led is iluminate, you should reduce the input signal level.l
9. SIGNAL LED
This LED will assist you in setting gain structure into the amp. With a source connected
to the amp and playing, turn up the channel gain control until this LED just starts to flash.
Once all the sources connected are playing, the SIGNAL LED may be on solid. This con-
dition is normal.
10. POWER LED
This LED will illuminate when power is turned on.
11. POWER SWITCH
This switch is used to turn the main power ON and OFF.
12. PHONE INPUT JACK
It is allow the high level signal to input such as mobile phone or MP3.
PA 6306
4
5
User Manual/Manual de uso
5 6
15 14
7 8
13 12 11
Pag. 4
EN
9
10