Samsung Jet Bot VR50T95 Serie Manual Del Usuario página 23

MAINTENANCE
Cleaning the Jet Bot
Before maintenance work, you should turn off the power switch at the side of the Jet Bot.
Emptying and cleaning the Dustbin
1 Detach the upper cover using the groove
under the cover.
3 Unlock the transparent clip at the side of
the Dustbin to open its Upper Cover.
5 Unlock the transparent clip at the bottom of
the Dustbin to open its Lower Cover.
2 Hold the Dustbin handle and lift the
Dustbin up.
4 Pull the Pre-motor Filter from the Dustbin.
6 Remove the dust on the filter and Dustbin,
clean them with water, and dry completely
in the shade.
English 23