Mark MX 8300 Manual De Uso página 4

EN
1. Effect: It allows to control the channel volume reverberation effect.
2. Treble: These knob setup the tone level for high frequencies.
3. Bass: These knob setup the tone level for low frequencies.
4. MP3 Player: It allows to load external file in MP3 format through USB port or SD card slot.
5. Mic IN: XLR 3 pin connector. It allows to connect a microphone.
6. Line IN: Jack connector for Line Input.
7. Gain: it allows to increase the power or amplitude of a signal from the input to the output.
8. Eff Volume: It allows to control the level of echo and time of internal reverberation added
back to the mix.
9. Echo Level: It allows to control the volume reverberation effect.
10.Equalizer: it allows a frequency-dependent processing of audio signals
11. Delay Level:It allows to control the volume delay effect.
12. USB Volume: It allows to control the volume of USB/SDCARD.
13.Volume Master: It allows to control the overall level of entire amplifier.
14. Power IN: It allows to connect the power cord.
15. Power Switch: It allows to switch on/off the amplifier
16. Speaker Output: It allows to connect the speakers.
17. Effect Loop: It allows to connect the effect send and return.
18. Power Led
19. Line IN:Jack connector for Line Input.
20. CD/TAPE Volume:It allows to control the volume of CD/Tape IN.
21. TAPE OUT: It allows to connect a recorder. impedance:1k ohms, Output Level:-10dB
22. TAPE IN: It allows to connect a cassette tape for playback.
Pag. 3
MX 8300
User Manual/Manual de Uso