Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
NOTE: Place the packaging with the equipment on a level surface. It is recommended that you place a
protective cover for your floor. Exercise caution when you are loading and transporting equipment.
Unpack and assemble the equipment where it will be used.
If necessary, ask the help of someone else.
STEP 1
STEP 2
Attach the Rear Floor Tube (02) into the rear of the Main
Frame (01). Fix the 3 Screws and 3 Washers (49, 50 and
51), securing the Rear Floor Tube to the Main Frame (01)
rear end.
Place the Front Floor Tube (06) underneath the saddle
bracket at the front of the frame. The square holes must
be placed faced down.
Align the holes in the Front Floor Tube with the holes on
the bracket and put 2 Carriage Bolts (20) through the
holes as depicted below. Place two Washers (22) on
bolts and screw on two Dome Nuts (27) and tighten to
fix.
6
Publicidad
