DISCLAIMER
To reduce the risk of injury, please read the instruction manual provided with the Mebak
massage gun.
IMPORTANT SAFETY INSTRUCTIONS:
BEFORE USING THE DEVICE OR CHARGING THE LITHIUM-ION BATTERY, READ ALL
INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL, ON THE CHARGER,
ON THE BATTERY, AND ON THE MASSAGE GUN.
QUESTIONS & ANSWERS
Questions
The display screen
shows "00 00" or "E |00".
The display screen won't
Cannot be
light up after charging.
switched on
The display screen could
light up but the device
doesn't work.
Cannot be switched off
Unable to charge
Stops working during massage
Abnormal noise
Reasons
The battery has ran out.
Battery malfunction.
The control panel is defective.
The device is in charging.
Power Switch button press
time is too short.
The Power Switch button is
defective.
The adapter or charging cable
does not fit.
The charging interface is
defective.
Power cord is not plugged
in tightly.
Touch the Power Switch button
accidentally.
The pressure force is over stall
force, the device turn off.
The device automatically turns
off as it is in the Stand-by status
for over 3 minutes.
The massage head is not
inserted in tightly.
Shake the device and hear there
are loose accessories inside.
8
Trouble shooting
Charge the device immediately.
Please contact us for replacement.
Please contact us for replacement.
The device cannot be turned
on/off or work during charging.
Keep pressing the Power Switch
button for at least 2 seconds.
Please contact us for replacement.
Please make sure that you are
using the original charging cable
and a 5V/2A adapter.
Please use other 5V/2A output
type-C charging cable to charge
or contact us for replacement.
Make sure the power cord is
plugged in place.
Turn on the device again.
Turn on the device again.
Turn on the device again.
Make sure the massage head is
inserted in place.
Please contact us for replacement.