ledscom LC-L-132-W Instrucciones De Montaje página 5

1. Disconnect the building-side connecting
cable from the power supply and secure it
against being switched on again. To do
this, trip the corresponding circuit breaker
of the house installation.
2. Screw the mounting plates (1) directly
onto the mounting base (soft, non-brittle
material, for example wood) using the
enclosed screws (2).
3. Then place the luminaire on the
mounting plates (1) with slight pressure
until they snap firmly into place.
4. Connect the fixture as shown in Figure
2, to a compatible fixture or lead wire. The
installation is now complete.
Subject to technical changes
LEDs Com GmbH, Dohrweg 2a, D-41066 Mönchengladbach, www.leds-com.de, Tel. +49 (0) 2161 - 5 75 99 76
English Under-cabinet light (LC-L-132-W) - Assembly instructions
Figure 1
Figure 2
1: Mounting plate 2: Screws
11/2022