Wesco WS5123K Manual De Instrucciones página 14

cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect the
power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
5. SERVICE
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will ensure
that the safety of the power tool is maintained.
SAFETY INSTRUCTION
FOR CUTTING
Hold power tool by insulated gripping surfaces,
when performing an operation where the
cutting accessory may contact hidden wiring
or its own cord. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
14
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
OPERATION
INSTRUTIONS
NOTE: Before using the tool, read the
instruction book carefully.
1. MOUNTING ACCESSORIES
CAUTION: For all work or when changing
accessories, always wear protective gloves. Avoid
risk of injury from the sharp edges of the accessories.
Accessories can become very hot while working, presenting
danger of burns! Make sure the tool is unplugged
prior to changing accessories.
WARNING: To reduce the risk of injury,
do not let the sharp side of the
accessory face back toward the user's hand.
To change the accessory
The Tool-Less Blade Change Lever allows you to change the
accessories without using an Allen key.
(1a) For accessories with an open-ended connection, flip
the tool-less blade change lever (1) forward to the open
position to loosen the flange (7). Remove universal end cut
blade. (See Fig. A)
(1b) For accessories with a closed-ended
connection, flip the tool-less blade change
lever (1) forward to the open position and
completely remove the flange (7). Remove
universal end cut blade. (See Fig. B1, B2)
EN