Publicidad
[Input]
[Settings] > [Input]
•
[Input List]: Selects the input mode.
•
[Auto Input Switch]: When [Auto Input Switch] is set to On, display will automatically switch to new input
when connected.
•
[Aspect Ratio]: Adjusts the aspect ratio of the screen. The display may look the same for [Full Wide], and
[Original] options at the recommended resolution (3840 x 2160).
- [Full Wide]: Displays the video in widescreen, regardless of the video signal input.
- [Original]: Displays video according to the aspect ratio of the video signal input.
[Picture]
[Settings] > [Picture] > [Picture Mode]
•
[Picture Mode]: Select the Picture mode that suits the each standard mode; [Custom], [P3-D65], [sRGB],
[Calibration], [BT.2100 PQ].
- Installation of
for [Calibration].
- [BT.2100 PQ] can be selected when the HDR function is on, and other [Picture Mode] can be selected when
the HDR function is turned off.
NOTE
•
The [Picture Mode] that can be set depends on the Input signal.
•
If the [Picture Mode] is changed, the screen may flicker or the resolution of your PC screen may be affected.
•
HDR content may not display correctly depending on Windows 10 OS settings, please check HDR On/Off
settings in Windows.
•
When the HDR function is turned on, the characters or picture quality may be poor according to Graphic card
performance.
•
While the HDR function is on, screen flickering or cracking may occur when changing the monitor input or
power on/off according to Graphic card performance.
19
Publicidad
