Jackery Explorer 1000 Pro Manual Del Usuario página 7

Low-temperature Warning (
If it is displayed on the screen, do not worry. It will automatically restore after the ambient temperature is
restored.
Basic Operations
Power On/Off
AC Output On/Off: Press the AC Button, the AC Output operation indicator lights up. Then you can connect the
equipment that needs AC charging. Press the AC Button again to turn off the AC Output.
USB Output On/Off: Press the USB Button, the USB Output operation indicator lights up. Then USB-A and
USB-C Output Ports can be connected to external load devices. Press the USB Button again to turn off the USB
Output.
Car Port On/Off: Press the Car Port Button, the Car Port operation indicator lights up. Then the Car Port can be
connected to the external load devices. Press the Car Port Button again to turn off the output.
LCD Screen On/Off
To Turn On, press the DISPLAY Button, any Output Power Button, or LED Light Button. Or, when there's a
charging input, the screen display will light up automatically.
To Turn Off, press the DISPLAY Button again and the screen display will turn off. Or, if there is no operation in
30 seconds, the product will enter a sleep state and the screen display will automatically turn off.
To get the screen always-on (under charging or discharging state), follow these steps: After the display
screen lights up, double-click the DISPLAY Button and the mode of Always-On Display will be on.
To turn off Always-On Display, follow these steps: Press the DISPLAY Button and the screen will be turned
off in 30 seconds.
Tip:During Always-On mode, the screen automatically turns off after 2 hours without charging or discharging.
LED Light On/Off
There are three modes of LED Light: Low Light mode, Bright Light mode, and SOS mode.
The operations are as follows: Press the LED Light Button, the LED will be turned on. The light will always
turn on in Low Light mode and the output power on the screen is 1W. Press again to enter the Bright Light
mode and the output power on the screen is 3W. Press the third time to enter the SOS mode and the output
power on the screen is 3W. Then, press again to turn off the LED Light. In any of these modes, the light can
be turned off by a long press.
CHARGING YOUR JACKERY EXPLORER 1000 PRO
Green energy first: We advocate to use the green energy first. This product supports two modes of charging
at the same time: solar charging and AC wall charging.
When AC wall charging and solar charging are turned on at the same time, the product will give priority to
solar charging and both methods will be used to charge the battery at the maximum permissible power.
) :
7
GB