Sigma BC 14.12 ALTI Manual Del Usuario página 15

2. Functions / Properties
– Service interval
The service interval informs

you when you have cycled a specified number of
kilometers and a bike inspection is due. This service
interval can only be enabled/disabled and pre-
configured by your specialist retailer. The device
comes with the service interval disabled.
– Battery status The battery status of the computer

head unit is displayed shortly before the battery
runs out. " low / computer" appears on the display.
After changing the battery, only the time needs to be
re-set.
– Memory chip Thanks to an inbuilt memory chip,

all total values and settings are permanently stored
in the bike computer. This means that you do not
need to reconfigure any settings (except for the time)
after changing the battery.
– PC compatibility
The bike computer is

PC-compatible. After purchasing the SIGMA
DATA CENTER software and docking station,
you can simply and effortlessly log your total
and current values on your PC. You can also
configure your bike computer's settings on
the PC.
www.sigma-data-center.com
15