Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Cleaning and Care
Filter clean
1) Clean the lint filter before each use.
Remove by pulling straight up.
2) Cleaning filter
Use wiping cloth wipe with your
hand.
3) lnstall filter
lf the filter is cleaned by damp cloth
ar in the water, please install after
the sun dry.
Cleaning cabinet and inner tube
Use soft damp cloth wipe when cleaning cabinet and inner tube.
1.Not to rinse by water direct.
2.Not to use neutral scour wipe.
3.Not to use gasolene and alcohol wipe.
Make sure open the front door for aeration
after cleaning the inner tube.
Safety reset
1. These dryers have a safety cut out switch which is activated by
temperature.
2. The safety reset button is on the backboard. lf your dryer not
heating this button must be reset before the dryer will operate
again. You may need to wait 10 minutes for cooling to occur.
3. The most common reason for the dryer to overheat is a blocked
filter. Clean the line fil ter after each load to prevent overheating
of the dryer.
16
V.2
Publicidad
