Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Locate the Base Panel (B) and Metal Feet (P)
and place them on a soft surface to protect the
finish. Insert four Long Bolts (EE) through the
Metal Feet (P) and into the threaded holes in
Base Panel (B). Fully tighten the Long Bolts
(EE) with a screwdriver. Insert four Short Bolts
(JJ) into the unthreaded holes on the Base
Panel (B) and into the threaded holes in the
Metal Feet (P). Fully tighten the Short Bolts (JJ).
2. Insert eight Cam Bolts (AA) into the threaded
holes in top of the Base Panel (B). Fully tighten
the Cam Bolts (AA) with a screwdriver. Locate
the Top Panel (A) and place it on a soft surface
to protect the finish. Insert six Cam Bolts (AA)
into the bottom of the Top Panel (A). Fully
tighten the Cam Bolts (AA) with a screwdriver.
3. Locate the Top Trim (G) and Left and Right
Inside Panels (F & H) and place it on a soft
surface to protect the finish. Insert four Wood
Dowels (CC) in between the unthreaded holes in
the Top Trim (G). Insert four Wood Dowels (CC)
in the unthreaded holes in the top of the Base
Panel (B). Lower the Inside Panel Assembly
down over the Cam Bolts (AA) and Wood
Dowels (CC). Install four Cam Locks (BB) in the
holes in the Left and Right Inside Panels (F & H)
and tighten as shown in the cam lock assembly
guide.
1
EE
P
2
A
3
CC
F
BB
CC
4
JJ
B
P
AA
B
G
H
B
Publicidad
