Monster Clippers MONSTERDRYER Manual página 7

OPERATING INSTRUCTIONS
1 Make sure that your hands are completely dry before connecting the
appliance to the mains.
2 Connect the hairdryer and switch the power- on/lock switch from 0 to I.
When fi rst switched on, the hairdryer is set with both air fl ow and temperature
set at the minimum, corresponding to the fi rst indicator light from the left,
above the control buttons.
AIR FLOW SPEED
The hairdryer is equipped with an air fl ow adjustment button. By pressing the
right, the air fl ow increases as shown by the white indicator lights. To decrease
the fl ow, press the left part of the adjustment button.
TEMPERATURE SETTINGS
The hairdryer is fi tted with 3 temperature levels that can be adjusted by
pressing the dedicated button. By pressing the right part of the button, the
temperature increases as indicated by the 3 red indicator lights. To decrease
the temperature, press the left part of the button.
COOL SHOT
You can use the "Cool Shot" button during hair drying to promote a long-lasting
style. To activate this function, simply press the Cool Shot button once. To
deactivate it, press the Cool Shot button for the second time. When the Cool
Shot is active, the hairdryer blows cold air regardless of the temperature it is
set on. The temperature indicators fl ash quickly to indicate the Cool Shot mode
as active. By turning it off, the temperature returns to the previous setting
(Cool Shot mode deactivation).
0000 Manual Monsterdryer 11 talen.indd 7 0000 Manual Monsterdryer 11 talen.indd 7
ENGLISH
7
12-01-21 12:52 12-01-21 12:52