Ipuro NA-408 Manual De Instrucciones página 46

FUNCTIONALITY
REMOTE CONTROL
On/Off
Adjust light intensity
Adjust diffusion intensity
Power button:
1st Press: Continuous diffusion (medium level) + warm light (high intensity)
2nd Press: Turn all functions off
Light button:
Already at warm white light when device is turned on.
1st Press: colour changing light
2nd Press: fixed light (stops on current light colour)
3rd Press: light off
4th Press: warm white light
(Following this cyclic)
When operating the light function without Diffusion.
1st Press: warm white light
2nd Press: colour changing light
3rd Press: fixed light (stops on current light colour)
4th Press: off
(Following this cyclic)
Dim light button:
Already at high warm light intensity when device is turned on.
1st Press: medium level
2nd Press: low level
3rd Press: high
(Following this cyclic)
Diffusion volume button:
Already at medium level diffusion when device is turned on.
1st Press: high level diffusion (25 ml +/- 5 ml per hr). Warm white light flashes 3 times for indication.
2nd Press: low level diffusion (10 ml +/- 3 ml per hr). Warm white light flashes once for indication.
3rd Press: medium diffusion (15 ml +/- 3 ml per hr). Warm white light flashes twice for indication.
(Following this cyclic)
Diffusion intermittent/continuous button:
Already at continuous diffusion when the device is turned on.
1st Press: intermittent mode: 30 seconds intervals
2nd Press: diffusion off
3rd Press: continuous mode
(Following this cyclic)
90
Adjust light mode
Adjust diffusion mode
FUNCTION BUTTONS ON DEVICE:
a) FRONTSIDE
Rotating button (at front side):
This button can only be activated when the product is in "ON" mode.
TURN: switch between diffusion intensity (between 10 – 25 ml / hr)
Turn clockwise to increase the diffusion intensity
Turn anti-clockwise to decrease the diffusion intensity
Please turn the control slowly a little further and wait briefly until the intensity has adjusted.
PRESS:
1st Press: intermittent mode: 30 seconds intervals
2nd Press: Diffusion Off
3rd Press: continuous mode
(Following this cyclic)
b) BACKSIDE
There are 3 press buttons at the back side.
Power button:
1st Press: Continuous diffusion (medium level) + warm light (high intensity)
2nd Press: Turn all functions off
Light button:
Already at warm white light when device is turned on.
1st Press: colour changing light
2nd Press: fixed light (stops on current light colour)
3rd Press: light off
4th Press: warm white light
(Following this cyclic)
When operating the light function without Diffusion.
1st Press: warm white light
2nd Press: colour changing light
3rd Press: fixed light (stops on current light colour)
4th Press: light off
(Following this cyclic)
Dim light button:
Already at high warm light intensity when device is turned on.
1st Press: medium level
2nd Press: low level
3rd Press: high
(Following this cyclic)
The brightness of the coloured light can be changed if a light colour has been permanently selected via the light mode key.
BATTERY STATUS AND CHARGING INDICATION LIGHT
The device has an integrated rechargeable battery and can be used (once it is charged) for a certain time without any power adaptor.
When using the diffuser with the adaptor plugged in, the light shows the status of battery.
Red light: device has low battery power
Yellow light: device is charging
Green light: device is fully charged
The diffuser will stop misting when water level becomes too low.
Always disconnect adapter from electrical outlet when not in use.
Charging Indication Light
91