RODCRAFT RC2266 Manual Del Operador página 7

Impact Wrench
Regional Requirements
WARNING Regional Requirements
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
www.p65warnings.ca.gov/
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.
Intended Use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic. Indoor use only.
No other use permitted.
Product Specific Instructions
Operation
See figures on page 2.
• Fix the accessories properly to the tool.
• Connect device to a clean and dry air supply.
• Before each use, Check if the socket is correctly held by
the retaining ring. If not, the retaining ring must be re-
placed.
• To start the tool, use the trigger (A). Machine speed is
increase by increasing pressure on the trigger. Release
the trigger to stop.
• To switch rotation, turn the knob to (B).
https://
• To adjust output power, turn the knob to different posi-
tions (C).
Service and Maintenance
Maintenance instructions
• Follow local country environmental regulations for
safe handling and disposal of all components.
• Maintenance and repair work must be carried out by
qualified personnel using only original spare parts. Con-
tact the manufacturer or your nearest authorised dealer
for advice on technical service or if you require spare
parts.
• Always ensure that the machine is disconnected from en-
ergy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months if
the tool is used every day. Replace damaged or worn
parts.
• To keep downtime to a minimum, the following service
kit is recommended: Tune-up kit
Lubrication
Use an air line lubricator with SAE #10 oil, adjusted to two
(2) drops per minute.
Disposal
• The disposal of this equipment must follow the legisla-
tion of the respective country.
• All damaged, badly worn or improperly functioning de-
vices MUST BE TAKEN OUT OF OPERATION.
Useful Information
Safety Data Sheet
The Safety Data Sheets describe the chemical products sold
by Rodcraft.
Please consult the Rodcraft website for more information
qr.cp.com/sds.
Information about spare parts
Exploded views and spare parts lists are available in Service
Link at www.rodcraft.com.
Country of origin
People's Republic of China
Copyright
© Copyright 2022, Desoutter GmbH, Edmund-Seng-Str. 3-5,
63477 Maintal, Germany
All rights reserved. Any unauthorized use or copying of the
contents or part thereof is prohibited. This applies in particu-
lar to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or mal-
function caused by the use of unauthorised parts is not cov-
ered by Warranty or Product Liability.
© Rodcraft - 8956002216
Safety Information
7