Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
: indicates best practices not related to personal injury.
1.
The motor of this pump has a thermal protector that will trip if the motor becomes too hot. The protector will reset
itself once the motor cools down and an acceptable temperature has been reached. The pump may start
unexpectedly if it is plugged in.
2.
Ensure the electrical power source is adequate for the requirements of the pump.
3.
Before using the pump, check the hose for holes or excess wear, which could cause leaks, and ensure the hose
is not kinked or making sharp angles. A straight hose allows the pump to move the greatest amount of water
quickly, and also check that all hose connections are tight to minimize leaks.
4.
After each use the pump should be flushed with clean water for 30 seconds. This will prevent any residual liquid
from solidifying and/or damaging the seal and pump.
5.
This pump is made of high-strength, corrosion-resistant materials. It will provide trouble-free service for a long
time when properly installed, maintained, and used. However, inadequate electrical power to the pump, dirt, or
debris may cause the pump to fail. Please carefully read the manual and follow the instructions regarding
common pump problems and remedies.
PACKAGE CONTENTS
4
Part
Description
A
Pump
B
Suction hose
C
Suction strainer
For Professional Technical Support call 1-844-242-2475
Publicidad
