Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Prior to Assembly
The ES726 engine sprayer is shipped in
one carton. Before assembling
your ES726, make sure you have all
the components required for a
complete unit:
I Engine, pump and chemical tank
assembly
I Sprayer Hose
Figure 3
1. Assemble the sprayer hose, valve,
wand and nozzles as shown.
See figure 3.
Filling The Chemical Tank
WARNING!
Clean all chemical spills immedi-
ately! Dispose of any residue in
accordance with all local, state and
federal laws and regulations.
All manuals and user guides at all-guides.com
I Valve
I Spray Wand
I Two head spray nozzle assembly
Super 25 and (D-3) nozzles (2 ea.)
I This manual and tool kit for routine
maintenance.
Carefully inspect all components
for damage, prior to assembly.
Figure 4
2. Mount the spray hose, valve, spray
wand and nozzles firmly to the
discharge outlet on the pump.
See figure 4.
Counter Clockwise to Remove
Figure 6
1. Place the ES726 Engine sprayer on a
level surface. Unscrew the chemical
tank cap counter clockwise.
See figure 6.
IMPORTANT!
The terms "left, "left-hand", and "LH";
"right", "right-hand" and "RH" ; "front"
and" rear" refer to directions as viewed
by the operator during normal operation.
Closed valve
position
Figure 5
3. Keep the valve closed until the
spraying operation has started.
See figure 5.
Figure 7
2. Pour chemical mix through strainer
only.
5
Publicidad
