WATSEA ENERGY Serie Manual De Instrucciones página 4

If the pump falls into the water, turn off the power before taking any other action.
To turn off the power supply, follow these procedures carefully:
A - Disconnect the hose from the pump.
B - Then disconnect the pump.
Instructions for use :
- To adjust the airflow, turn the regulator clockwise or counterclockwise to obtain the desired
airflow.
- Always unplug the unit when not in use, before inserting or removing parts, and before
cleaning.
- Never pull on the cord to remove the plug from the outlet.
- Grasp the plug and pull to disconnect.
Installation of the device :
- Make sure the air pump is positioned above the water level.
- If the air pump is placed below the water level, a check valve is required to prevent the water
in the aquarium from flowing back.
- The pump is not designed for submersible operation, therefore it is not allowed to place it in
water.
3