Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
TROUBLESHOOTING
Troubles
Possible Causes
The unit does not start when
•
pressing power button.
•
•
The unit doesn't cool enough.
•
•
•
•
•
Noisy.
•
•
E0 Code
•
E1 Code
•
E2 Code
•
E3 Code
•
E4 Code
•
12
Suggested Remedies
Water full indicator lamp
•
Drain the water out of the
blinks and water tank is full.
water tank.
Room temperature is higher
•
Adjust the temperature.
than the setting
temperature.(Electric
heating mode)
Room temperature is lower
that the setting temperature.
(Cooling mode)
The doors or windows are
•
Make sure all the windows
not closed.
and doors are closed.
There are heat sources
•
Remove the heat sources if
inside the room.
possible.
Hot air exhaust hose is not
•
Connect or clean the hot air
connected or blocked.
exhaust hose.
Temperature setting is too
•
Reset the temperature.
high.
•
Clean the air inlet.
Air inlet in blocked.
The ground is not level or
•
Place unit on a flat, level
not flat enough.
ground if possible.
The sound comes from the
flowing of the refrigerant
inside the air conditioner.
Room temperature sensor
•
Replace room temperature
failed.
sensor.
Condenser temperature
•
Replace condenser
sensor failed
temperature sensor.
Water tray full when cooling •
Take off rubber stopper and
empty the water.
Pipe temperature sensor
•
Replace pipe temperature
failed.
sensor.
Water tank full
•
Please empty the water
tank.
THE PRODUCT OR EQUIPMENT CONTAINS
FLUORINATED GREENHOUSE GAS.
Art.nr.
Coolant:
Quantity in kg:
Global Warming Potential:
CO2 Equivalent in tonnes:
Art.nr.
Coolant:
Quantity in kg:
Global Warming Potential:
CO2 Equivalent in tonnes:
DECLARATION OF CONFORMITY
•
Hereby, Smartwares Europe declares that the radio equipment type
352900 / 353200 are in compliance with Directive 2014/53/EU
•
The full text of the EU declaration of conformity is available at the
following internet address: www.princesshome.eu/doc
352900
R290
0.212
3
0.000636
353200
R290
0.226
3
0.000678
Publicidad
